ATM is a software and hardware device that accepts and dispenses cash using plastic cards issued to an individual by banks. The very first ATM was installed in London in 1967. He made only cash disbursements. It is not difficult to install an ATM, but it must be done correctly, observing all the necessary security requirements, since such devices are often the subject of robbery.
It is necessary
- - anchor bolts;
- - building level;
- - puncher.
Instructions
Step 1
Before proceeding with the installation of the ATM, it is necessary to choose a suitable place, which can be located in the premises of credit organizations, large stores or in the openings of buildings for serving customers from the street side. The ATM should be located in a place convenient for control by security personnel. If the device is planned to be left in a room with free access: metro, shops, shopping centers, it must be placed away from shop windows and other glazed surfaces. In addition, direct access to vehicles should be closed.
Step 2
After the location is selected, conclude an agreement with the organization in whose premises you plan to install the software and hardware device.
Step 3
Installing an ATM requires careful preparation of the floor or wall if it is planned to be installed in a building opening. When preparing the floor, make sure that it can support the weight of the ATM, which reaches 900 kg. The floor surface under and around the device must be strictly horizontal, you can check this using the building level.
Step 4
After making sure that the floor meets all the necessary rules, drill installation holes in it and attach the device to them using anchor bolts. Fill the gap between the wall and the bezel with a weatherproof sealant if the ATM is installed in a building wall.
Step 5
When the ATM is in place and secured, equip it with a video surveillance system and burglar alarms. In addition, take care of a stable power supply to the self-service device.
