You want to become a Beeline subscriber, go to a cellular salon, choose a tariff that is convenient for you, buy a SIM card. The SIM card is attached to a rectangular plastic base. To start using it, you need to disconnect it from the base, insert it into the corresponding slot of the cell phone, activate the starting balance and call friends and colleagues.
It is necessary
Cell phone, cell phone user manual, Beeline SIM card with the selected tariff plan
Instructions
Step 1
So, it all starts with installing a SIM card. The phone must be off. You need to remove the back panel from it. Remove the battery, there will be one or more connectors under it, depending on the phone model. As a rule, this is a slot for a flash drive and a SIM card. They vary in size and are labeled so that you can easily determine where the SIM card should be placed. If you have any difficulties - refer to the instruction manual.
Step 2
Insert the battery, close the back cover and turn on the phone. You may need to enter a PIN. Nowadays, more and more often, the PIN code request is disabled in the default settings. However, if you still need to enter it, pay attention to the plastic base from which you disconnected the SIM card. Several codes will be listed there. Two columns of two codes with PIN and PUK signature. Dial your PIN. If you enter the wrong code three times in a row, the card will be temporarily blocked.
Step 3
If you want, you can turn off the PIN code request or change the code to one that is more convenient for you to remember. The manual for your cell phone contains information for this action as well.
Step 4
If, after entering the wrong code, your SIM card is temporarily blocked (if you entered the PIN correctly, you skip this step), unblock it using a USSD command like: ** 05 * PUK code * PIN code * PIN code # Here you are you can enter any four digits as a PIN-code, which are more convenient for you to remember. An incorrectly entered PUK code ten times in a row leads to a complete blocking of the SIM card, which now only needs to be changed, since it is no longer subject to activation.
Step 5
The network indicator on the phone screen should confirm that you are located in the coverage area of the Beeline network. If not, change the entire location, you may have to wait for a while due to technical failures in the network. To activate the starting balance on the personal account, you need to dial the USSD command * 101 * 1111 #
Step 6
To make sure that the starting balance is activated, do one of the actions convenient for you: 1) dial the USSD-command * 102 # (# 102 # provided that unreadable characters were received in response); 2) dial the number 0697; 3) select the SIM menu in the menu of your phone and send a request through it; 4) dial the Beeline customer support number 0611.
Step 7
Make calls and share your number with family, friends and colleagues. To find out how not to call everyone personally, go to the Beeline website.
