Residents of the private sector have to independently improve their homes, digging septic tanks, wells, paying for services to construction companies for the installation of gas pipelines. And if you can still do without a pipeline with methane using cylinders, then it is impossible to make your life comfortable without a water supply system. There is no water, no drain for the sewage system, and, therefore, the amenities in the yard will only complicate life. What to do if it is not possible to bring water pipes from high-rise buildings, and the desire for comfort is so great that you are ready to pay any amount, if only there was not a sink in your kitchen, but a faucet?
Instructions
Step 1
Decide whether you will independently carry out the work on deepening the well or hire specialist drillers.
Step 2
Select the location where you will be drilling. Clear. Purchase the required number of water pipes of various diameters and wall thicknesses.
Step 3
Calculate the footage taking into account the desired depth of the well. Remember that the state prohibits drilling to a depth of more than 50 meters.
Step 4
Prepare the drilling tool. Install a drill prepared for the well with drill pipes attached to its end into the recess. Alternate pipes depending on the deepening into the well.
Step 5
If you intend to make the hole in a rotary way, clamp the drill pipes in a device that helps to give rotation. Turn on the unit and start the dimple rotation.
Step 6
If, instead of a roter and drill pipes, you have a screw installation, prepare a place for dumping the extracted soil. This method is mainly used when drilling wells for water supply.
Step 7
Use flushing fluid to clean the machinery and parts of the drilling rig.
Step 8
Drill either at right angles or at a sharp angle. Remember that the directional drilling method crumbles the well faster, so do not hesitate with the installation of the pipeline.
